UC-230 Remote Control Switch

The UC-230 electronic switch can replace a standard mechanical wall
switch. It is directly powered from the mains (230 V AC). By pressing the
switch up or down it works as a standard mechanical switch. At the same
time a built-in receiver in the UC-230 enables reception of control signals
transmitted from RC-xx remote controls or JA-60 wireless detectors. Thus
the mains electric circuit can be switched on or off using a remote control
or automatically when a wireless detector is triggered. Different operating
modes can be used (2 minutes pulse, over switching, on/off).

Specification:
Power supply mains 230 V, 50 Hz
Switch output 25 W – 300 W
Built-in fuse F1.6 A
Coverage class IP 40
Operating temperature indoor, -10°C to +40°C
Working frequency 433.92 MHz
Working range (open area) RC-11 – max. 30 m
RC-22, RC-28, JA-60P, N – max. 100 m
Number of RC remotes or JA-60 detectors max.8
Note: If a momentary consumption is 2 A (for maximum 10 seconds)
and the permanent load doesn’t exceed 300 W, then a 2 A fuse can be
used (fluorescent lamps).
Complies with EN 60950, EN 300220, ETS 300683.
Hereby, Jablotron Ltd., declares that this UC-230 is in compliance with
the essential requirements and other relevant provisions of Directive
1999/5/EC.